having trouble with plugs and where they go
Thread Starter
PRO BISCUIT DUNKER
Joined: Nov 2007
Posts: 70
Likes: 0
From: southport, building: mk2 xr2 turbo
having trouble with plugs and where they go
right iv got my mfi engine in my fiesta xr2, i know its an escort section so sorry. but im having trouble putting plugs in the right place etc.
iv got the blue, yellow, brown ones right, but iv got a grey one which need to no where that goes, a 3 pin one and also on the loom say 14" down the line from one of the ecu's there 2 wires branching off for a plug, but the plug has gone and someone has just replaced it with 2 spade connector parts. wires are brown and brown/green but think most plugs are that color
how do i know what that goes to
pic of your bay and metering unit would be good
cheers lew
iv got the blue, yellow, brown ones right, but iv got a grey one which need to no where that goes, a 3 pin one and also on the loom say 14" down the line from one of the ecu's there 2 wires branching off for a plug, but the plug has gone and someone has just replaced it with 2 spade connector parts. wires are brown and brown/green but think most plugs are that color
how do i know what that goes to
pic of your bay and metering unit would be good
cheers lew
PassionFord Regular
Joined: Nov 2007
Posts: 367
Likes: 0
From: under the bonnet
there are some good pictures of were the plugs go on this one coz i had trouble sorting mine out 
https://passionford.com/forum/viewto...highlight=plug
https://passionford.com/forum/viewto...highlight=plug
Thread
Thread Starter
Forum
Replies
Last Post
deathrider666
Technical help Q & A
3
Sep 28, 2015 06:12 PM
