2wd Exhaust Manifold with trousers £50

Inlet Manifold with yellow injectors, elbow, fuel rail £40

2 Sapph front Lights, good Condition £20

2 tinted rear lights and bulb holders £15.00

2 Clear front Indicvators £10 the Pair

Radiator Fans £30

SOLD

SOLD

SOLD

SOLD

SOLD

SOLD

Postage is on top and will only post by Registered mail due to another PF member doing me over

 

Stu H will want that exhaust housing!!!

 

Any pics of the head where it needs repair m8, also thickness and postage costs please.

Steve

 

will get it measured for you buddy, the engineering set they would plug the stud and retap it for around £15.00 so no biggy

 

you have pm...

 

Thanks m8, need one soon for a rebuild so have cash waiting.

Steve

 

The head is meant to have Bronze valve guides also, so the person i bought it off informed me

 

pm'd again about pistons

 

hi
are the pistons good enough to use in my freshly bored block ? what condition are the rings in ? are they 2 or 4 wd? have they got valve cutouts?
cheers.

 

pistons are 0.5 marle, up to you on the rings but were taken out of an engine, if i was putting in new block then £70 on a set of rings, other than that there perfect, no valve cutouts iin them

 

pistons sold to me pending removal of rods

 

Wheres the .63 housing gone

 

Sold mate within 3hours

 

Exhaust Manifold for those who have asked



Inlet Manifold



Throttle body not inc, but rail, injectors, plenim and elbow are including air temp sender

 

Updated with pics and prices