Which Nitro RC Car??
Thread Starter
PassionFord Post Whore!!
Joined: May 2003
Posts: 8,219
Likes: 5
From: Essex... innit!!
As above a few of me mates are getting into them and have persuaded me to join in the action but unsure what one to get!! They are persuading me to get a Losi 8ight buggy but at over Ł400 it aint cheap (considering its only meant to for a laugh and ill probably get bored of it within a few weeks!!!!).
Are there any experts out there than can give me some alternatives to look at? I've seen the Losi Muggy RTR which I quite like but don't really know much about them!! Would prefer a 1:8 Truggy rather than a low car as the track is a muddy(ish) one!!!!
Cheers
Chris
Are there any experts out there than can give me some alternatives to look at? I've seen the Losi Muggy RTR which I quite like but don't really know much about them!! Would prefer a 1:8 Truggy rather than a low car as the track is a muddy(ish) one!!!!
Cheers
Chris
I've found that life I needed.. It's HERE!!

Joined: Mar 2006
Posts: 1,100
Likes: 0
From: Norfolk, UK
Xt2 is a good start we do them Ł199.00 all in starter spanners etc
http://www.ripmax.com/item.asp?itemi...2&Category=010
Or the hyper 7 aint to bad but the xt2 is better quality IMO Sold lots of them
Tim
http://www.ripmax.com/item.asp?itemi...2&Category=010
Or the hyper 7 aint to bad but the xt2 is better quality IMO Sold lots of them
Tim
Originally Posted by Tim
Xt2 is a good start we do them Ł199.00 all in starter spanners etc
http://www.ripmax.com/item.asp?itemi...2&Category=010
Or the hyper 7 aint to bad but the xt2 is better quality IMO Sold lots of them
Tim
http://www.ripmax.com/item.asp?itemi...2&Category=010
Or the hyper 7 aint to bad but the xt2 is better quality IMO Sold lots of them
Tim
diff and drive shaft scews have to be kept an eye on aswell.
i can only comment on the XT2, over grass, loose dirt etc it is brilliant, after run oil is a must tho as is priming the engine.
http://cgi.ebay.co.uk/XTM-XT2-1-8TH-...QQcmdZViewItem
check the vids of them on you tube (oh and they do jump well
)
http://cgi.ebay.co.uk/XTM-XT2-1-8TH-...QQcmdZViewItem
check the vids of them on you tube (oh and they do jump well
Trending Topics
20K+ Super Poster.
iTrader: (1)
Joined: May 2003
Posts: 21,512
Likes: 0
From: Essex... and Birmingham!
Stop fannying around with pony RC cars and get a proper toy
http://www.metacafe.com/watch/804337...odel_rc_plane/
http://www.metacafe.com/watch/804337...odel_rc_plane/
Originally Posted by Porkie
Stop fannying around with pony RC cars and get a proper toy
http://www.metacafe.com/watch/804337...odel_rc_plane/
http://www.metacafe.com/watch/804337...odel_rc_plane/
you have got to be joking
Thread Starter
PassionFord Post Whore!!
Joined: May 2003
Posts: 8,219
Likes: 5
From: Essex... innit!!
Tim - yeah I like that Hyper ST looks smart. Are they just as good as the Losi ones??
Porkie - fook me thats a bit big to stick in the cupboard when not being used!!!!!! I'd need a fookin hangar!!
Chris
Porkie - fook me thats a bit big to stick in the cupboard when not being used!!!!!! I'd need a fookin hangar!!
Chris
speak to rob@scc he races these at a pretty competitve level, and knows his stuff.......
i was thinking about getting into 1/8th rallycross a little while ago. and as i used to race 1/10th RC when i was a kid, i decided i might as well get some pretty decent kit if i wanna go racing with it at club level
i was looking at investment of around 1k to be competitive, and i already had the radio gear
i was thinking about getting into 1/8th rallycross a little while ago. and as i used to race 1/10th RC when i was a kid, i decided i might as well get some pretty decent kit if i wanna go racing with it at club level
i was looking at investment of around 1k to be competitive, and i already had the radio gear
Thread Starter
PassionFord Post Whore!!
Joined: May 2003
Posts: 8,219
Likes: 5
From: Essex... innit!!
Tim - this one yeah mate??!! http://cgi.ebay.co.uk/HoBao-Ho-Bao-H...QQcmdZViewItem
I take it being a RTR it includes everything bar batteries and fuel? Also wheres the best place to get the shells from - i want a Chevy S10 truck
!!!!
I take it being a RTR it includes everything bar batteries and fuel? Also wheres the best place to get the shells from - i want a Chevy S10 truck
Thread Starter
PassionFord Post Whore!!
Joined: May 2003
Posts: 8,219
Likes: 5
From: Essex... innit!!
Whats the difference between these 2 chaps, I thought the pro would be dearer!!??
http://www.wheelspinmodels.co.uk/ite...o-Truggy__2263
http://www.wheelspinmodels.co.uk/ite...T-Truggy__21a6
Chris
http://www.wheelspinmodels.co.uk/ite...o-Truggy__2263
http://www.wheelspinmodels.co.uk/ite...T-Truggy__21a6
Chris
Originally Posted by cfoster
Whats the difference between these 2 chaps, I thought the pro would be dearer!!??
http://www.wheelspinmodels.co.uk/ite...o-Truggy__2263
http://www.wheelspinmodels.co.uk/ite...T-Truggy__21a6
Chris
http://www.wheelspinmodels.co.uk/ite...o-Truggy__2263
http://www.wheelspinmodels.co.uk/ite...T-Truggy__21a6
Chris

RTR kits have everything
depends on what you want, i want a 1/8 buggy next, currently got a savage x Monster truck which is awesome, can take it anywhere, very strong i must say lol
infact, was tweeking with mine earier

Gp A Filter...eat ya heart out
infact, was tweeking with mine earier

Gp A Filter...eat ya heart out

Originally Posted by wirralphil
the model one with 4 small jet engines looked and went better than that one porkie (no links tho) supermodels did it on Discovery.
Like some of the lads said XTM XT2 or Hyper 7. Driven both and for the money you cant go wrong, although the hyper looks nicer underneath the shell it does the same job.
Unless you want your wallet raped and to be dumfounded when trying to find yank size screws to replace the ones you WILL lose stay away for the losi stuff for messing. Losi stuff is nice and you to be some of the best until they were bought out by Horizon hobby and started selling all sorts of shite. The main guy that made Losi cars what they were, Gil Losi Jr. now works for Kyosho so if you ever start getting into serious racing head for Kyosho.
Used to race 1/8 buggies for Kyosho and sold and fixed R/C models for 3 years so you could say i know a thing or two about them (blowing me own horn
)
Unless you want your wallet raped and to be dumfounded when trying to find yank size screws to replace the ones you WILL lose stay away for the losi stuff for messing. Losi stuff is nice and you to be some of the best until they were bought out by Horizon hobby and started selling all sorts of shite. The main guy that made Losi cars what they were, Gil Losi Jr. now works for Kyosho so if you ever start getting into serious racing head for Kyosho.
Used to race 1/8 buggies for Kyosho and sold and fixed R/C models for 3 years so you could say i know a thing or two about them (blowing me own horn
)
Thread
Thread Starter
Forum
Replies
Last Post
steerfromdarear
Restorations, Rebuilds & Projects.
28
Jan 29, 2016 06:14 PM










