APT Evo makes 636bhp......Vid/Graphs
Thread Starter
Joined: May 2003
Posts: 23,329
Likes: 6
From: Norfolk
APT Evo makes 636bhp......Vid/Graphs
For those that don't visit the Resto section, I thought I'd share Gary's good news with you all.
After an eventful few months with the Evo and several changes in spec, today, on a quick map and at only 1.8 bar of boost, Gary's Evo made 636.5bhp, 514.3bhp at the wheels.
To put it in perspective, this puts the car just about into the Top Ten of those listed on the MLR (which include Norris' Evo etc), but everything above it is running over 2.0 bar of boost and/or race fuel. We are still on pump fuel.
Estimated Flywheel Power vs Flywheel Torque.....
Power @ Wheels vs Tractive Effort (raw Torque)
Power @ Wheels vs Boost
I have a video of it which I am trying to upload, will post it when I have sorted it.
After an eventful few months with the Evo and several changes in spec, today, on a quick map and at only 1.8 bar of boost, Gary's Evo made 636.5bhp, 514.3bhp at the wheels.
To put it in perspective, this puts the car just about into the Top Ten of those listed on the MLR (which include Norris' Evo etc), but everything above it is running over 2.0 bar of boost and/or race fuel. We are still on pump fuel.
Estimated Flywheel Power vs Flywheel Torque.....
Power @ Wheels vs Tractive Effort (raw Torque)
Power @ Wheels vs Boost
I have a video of it which I am trying to upload, will post it when I have sorted it.
) 
Thread Starter
Joined: May 2003
Posts: 23,329
Likes: 6
From: Norfolk
Trending Topics
PassionFord Post Whore!!
Joined: May 2003
Posts: 5,719
Likes: 0
From: Kent
Excellent result and im really pleased for Gary 
I know he's been tinkering and its been a headache getting their but its amazing work.Whats the plan now? borrow some of Brens monkey juice and see if it could make 700bhp?
I know he's been tinkering and its been a headache getting their but its amazing work.Whats the plan now? borrow some of Brens monkey juice and see if it could make 700bhp?
PassionFord Post Whore!!
Joined: May 2003
Posts: 5,719
Likes: 0
From: Kent
Originally Posted by Christian and Beccy
http://www.youtube.com/watch?v=CRxTuR5kIf4
look at that trying to climb out the rollers even tho its strapped down I know Tony was gutted he couldn't get a little demo out in it the other weekend
Thread Starter
Joined: May 2003
Posts: 23,329
Likes: 6
From: Norfolk
Originally Posted by Fiecos Dan
Whats the rough spec?
AMS VSR Plenum
AMS GT35R Turbo Kit (Tial 'Gate)
RC Engineering 1000cc Injectors (almost flat out)
MoTeC M800 ECU (with Datalogging, Wideband control, ALS add-ons)
Full Evo RS Transmission conversion (Gearbox, Rear Diff and Driveshafts)
See our Resto thread for more detail!
Thread Starter
Joined: May 2003
Posts: 23,329
Likes: 6
From: Norfolk
Originally Posted by Chip-3Door
Is it still on a standard head currently?
However, it is still amazing to drive and very responsive, so it's likely to stay as it is.
Running it on Race fuel is almost a certainty though, just to see what it will do.
Dan from Owen's was telling me that they very rarely touch the heads now until going well past 600bhp.
Amazing engines that you can get so much power from them with basically just a very straightforward bottom end rebuild and a remap on a bigger turbo essentially.
(apologies if that makes it sounds like im playing down your achievements, im not, the devil is in the detail of exactly which turbo to go for etc)
Amazing engines that you can get so much power from them with basically just a very straightforward bottom end rebuild and a remap on a bigger turbo essentially.
(apologies if that makes it sounds like im playing down your achievements, im not, the devil is in the detail of exactly which turbo to go for etc)
PassionFord Post Troll
Joined: May 2003
Posts: 2,984
Likes: 1
Christian - awesome matey - awesome!
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
Originally Posted by Steven_RW
Christian - awesome matey - awesome!
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
Fantastic train of thought
Originally Posted by Steven_RW
Christian - awesome matey - awesome!
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
Tell me - if I turned up with an Evo 6 RS - how much roughly would it cost to spec up the engine to the same level. Would I just give u Ł10k or something - or are we talking far more or less. (including manifolds intercooler ecu etc)?
Cheers
Steven RW
fed up of the m3?
600bhp 6 would be such a tool
