As title im Breaking my car

Genuine 580BHP engine for sale only done 3k so nicely run in inc Super 8 ecu Gt35 turbo and fuel system £9k ono

Brand new Fixit kit gearbox inc Reyland Hydraulic centre push twin plate clutch £3250

Brembo 8pots and 380mm discs inc Spare Bells and Rotors and new Ferodo pads £2500

Brembo 4pots(rear) with 330mm discs and brand new ferodo pads(came off the Reyland Gumball car £1000

As new Quaif thickwall ATB 4x4 front diff £800


Loads of other bits to come(inc absolutly mint 20k from new Ash Black Monte shell and Id) But want the Engine and box to sell first

Anyone interested in the Engine PM me and i will send back Full Spec

 

Jon, Ringing you after work.

i want the front diff, crossmember, anti rollbar etc!!!

 

you were quick there Kelv.

 

1st dibbs on the Bonnet if it ever gets to that type of part

Cant believe your getting shut

 

list of parts please Jon.

 

Plenty of parts inc

Tarmac spec group A Billys
Engie oilcooler inc Sandwich plate and remote filter
Gearbox oilcooler inc High pressure oil pump
Air injectors
Group A cone filter
Full Collins/Tarcal Breather system
Lots of shiny
Lots of adjustable stuff underneath(Kelv has first dibs on this)
Quaife Atb Rear diff

Probably lots of stuff ive forgot



None of this stuff is for sale though until the engine goes

 

Cheers Jon.

will speak again soon, but bits ill want are Front Diff, Grp A crossmember, Grp A anti rollbar, drop links, lower arms and compression struts.

but im sure like last time ill end up grabing more bits

is a shame to see it broken tho!!

 

Oh- i'll have the cone filter as and when - i guess its in good condition as mine has seen better days...

 

PM for ATB rear diff and interior

 

Why you breaking it?

 

same old story I would imagine , worth a hell of a lot more in parts

 

rolling shell price
you old saff is doing well here after i sorted the fan problem out

 

M600 BHP is being broken

I'd be interested in a few of the engine bay parts once they become availble..the cooler being one of those parts

 

Get a list up with prices when you can bud

 

price on breather system

 

oil cooler set up and alloy rad for me.

and any of the other stuff in my pm.

 

Thanks for all the Pms chaps

But i need the engine to sell first and then i will put the rest of the car up for sale inc prices

Ive kept everybodys pms for when the Engine sells

 

Price on Billies please,Cant see me getting my leda's now

 

Glad theres nothing on the list a need this time jon.


Head and turbo is still going strong

 

check kelvin tanking all the good parts forget your bits off me now ....

shame to see this tho this car was gonna be huge ... put a list up of whats gone and still up for grabs jon

 

Does the K&N have a 100mm trumpet?

 

if kelv doesnt have front diff, i will

 

be sad to see this one get broken m600bhp is one of those iconic ford imo

 

No chance of that Andy, if the car comes apart ill be there with cash in pocket and helping

 

Thank you

 

Engine built by Harvey Gibbs and mapped by Ahmed Bayjoo

 

Does the engine have blue samco's ??

 

Na m8 Red

And the K+N is 100mm

 

my engine conversion and build from Harvey cost me £9600 all in 3 years ago for 400BHP and have only done approx 5k miles. Wish it had been due to be built now and would have had yours mate.......your car was in Harveys when mine was

The engine is a steel at that price imo......do you do p/x and finance

 

Thanks Scott

Yeh the engine is a steel, when you think peeps can get upwards of 2k for there good standard engine add 6.5k on top and Bingo

 

Have you got a Pectel monitor ?

 

how much for the interior (and is it leather?), rear pop-out window's (if it has them?) and the wheel's, if there standard one's??

 

tezmanian devil, its a monte mate so it doesnt have leather.

and the wheels are 9x18" compomotive MO's in black and i have a sneaky suspiscion that they are already allocated.

 

dam and dam lol.
would never fit them wheel's on my car lol.

do you know anyone that has some standard cossie wheel's for sale?

 

Kelv

go on, let me have the diff

 

mmmm 580bhp/470lbft engine with dyno plots

 

you have pm on brakes and wheel cash waiting thanks

 

If you break the engine - would be interested in the cylinder head.

 

Hi is the gearbox on standard ratios and will the twin plate clutch run on a normal hydraulic conversion,what sort of price will you do it with the cooler kit

cheers andy