My engine
Thread Starter
Almost there!
iTrader: (4)
Joined: Jun 2003
Posts: 7,434
Likes: 0
From: Gatwick (ish)
Basically an almost standard spec....
was completely overhauled and re built about 15,000 miles ago
its had the bottom end rebalanced and had new mahle pistons fitted to a slightly lower compression ratio (7.7:1), obviously with all new bearings/shells/rings etc and in a 200 block
Standard head and cams with new valve guides etc.
fitted with a multilayer cometic head gasket.
engine has run beautifully and smoothly at all times.
Can be suplied with either a 2wd or 4wd sump.
Open to offers around £1,700 ono
was completely overhauled and re built about 15,000 miles ago
its had the bottom end rebalanced and had new mahle pistons fitted to a slightly lower compression ratio (7.7:1), obviously with all new bearings/shells/rings etc and in a 200 block
Standard head and cams with new valve guides etc.
fitted with a multilayer cometic head gasket.
engine has run beautifully and smoothly at all times.
Can be suplied with either a 2wd or 4wd sump.
Open to offers around £1,700 ono
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post






