S1 & S2 (Possibly Saph's, Fiestas, R5, pug 205)

Who's interested?, just got all the moulds made, and can knock them out.

Will get pics up in the next hour or so of the s2 one thats just been made.

Quality is superb.

Unsure on price yet.

Cheers

Monkey Motorsport

 

interested

 

Sweeeeeet

Maybe 1 n/s

Cheap as possible

 

will get pics up soon

waiting on arrival on the digi camera.

If there's enough interest, the can be made from pretty much any car

 

Make them for the Saff????? I'll defo have one for the Saff if you can!

 

yeah saph wont be a problem, or do you mean something like (morrettes?)
as that aint gonna happen

 

No, i mean something like you see on Skylines in Japan, I.E Outer frame of headlight with Duct in middle with mesh behind.

 

any idea on price (ballpark figure?)

 

Thats what im thinkin Ryans made

Well.............. i hope

 

yeah thats what they are mate so



yeah a saph one would be no problem then

 

Ok, once i've seen pics and know the price and i'm satisfied with the quality, i'll order one for each.

hows that sound???

 

yeah sounds fine mate, s2 ones can be knocked out straight away, saph ones will have to be made obviously, will have a word with the man and see what he says.

Saph one's would be easier, as the glass is removable. so maybe could do something that way.

will have to investigate.

 

Same here

 

right best get the pics up and make up a price then

 

BTT

PICCYS mate

 

Yeah get some pics and a rough price for a series 1 and i'll be very intrested in a n/s one.

 

moved

 

what would be trick, is make the hole larger, and for cars on cos man... route the cone filter so it sticks out of the hole

 

As i took the photos i have seen this in the flesh and i must say he has done a top job...............

hhhhmmmm maybe he could do one for me VR

 

Couldn't you of made the whole a little bigger?

 

The hole can be made any size............. its about 80-90mm at the moment

 

Got a mate that might be interested in one for a Mk4 Escort Ryan, so get the piccys up mate!

If you don't get a price up either, i'll start the bidding at a fiver each...................

 

Ryan, do you need headlights back in exchange??

Coz i've got like, 5 pairs kickin around

 

Yeah i'm intrested if the hole was bigger. Go on how much?????

 

Could they be cut out so there like the same vent as in F55 SOY? Not sure that the hole looks big enough matey?

 

mate im making these too, should the hole not be bigger like this

 

If your gonna have some sort of ducting to your Air filter then Ryan's one is spot on actually but would need a lip on the back of it to possibly mount a pipe to it?

If you want airflow in the engine bay then the bottom one is better but IMO still needs a bigger hole (only time i'll say that! ).

 

im sure the hole can be made any size, currently it is pefectly round and about 80-90, im sure something could be done for people who want larger holes, this way, as has been suggested a lip can be bonded on for a duct scoop.

Let me know your thoughts, as your the market, so i want to know what you guys wants, price are going to around £50 i think, have to talk to my people and see what costs are involved are end.

They will be supply in primer, and at extra cost can be sprayed, and possibly the backing plates shoted and poweder coated, but numbers will need to be confirmed, as when we start going down that route, doing the odd 1 or 2 here and there will prove tideous.

Many thanks

Ryan

 

so if you can imagine, this is pretty much what any headlight could look like, all we need is a headlight and my man can pretty much do anything as you can see.

so could be done for an endless number of cars.

 

Check mine oot

 

looks sweet mate, PM how much it cost

im sure my boy could knock something up very very very similar, and you could sell them on the GTR site at a tidy profit

 

125quid delivered mate, new

 

looks good mate, almost sure he could do one similar at a fraction

 

Like dan said, I would also prefer it if the hole was like Soy's (ooer!) ie goes straight back so the hole at the rear is similar in size to the one at the front. Defo have for an FRST if they were.

 

im sure something could be done, but i dont see why you need such a big hole?

 

A fraction eh, might be a possiblilty, esp R33 ones as the Tomei R32 and 34 ones look good like mine, the R33 ones are GAAAAAY, a differnt style, the gayest style ever, lol.

Il keep it in mind, building up a list of items as possible sellers...

 

 

that looks spot on to me Ryan, Hole looks plenty big enough to me, If you want the hole any bigger than that chaps, you may aswell just remove the sodding headlight!

That hole size is a beaut to me cause;

Pipe straight from the duct into the metering head with a filter/gause to stop foreign objects.

Get a defo price for Both i wanted please (Saff O/S + S2 N/S) and one for the Nova in the sig (Late Nova O/S) , so that we can work a deal, some sort of discount for the three maybe, Aiii! and we can talk business!

 

interested S1 rst
cost ?????
i have a spare headlight
looking good though

 

yeah s1, are already in the making so thats a defo, as im having one for my track car

Price is going to be similar to s2 ones, maximum price is gonna £50-60 + say £5 P&P

Didnt expect it to be such a hit

NOS Rst, im sure we can work something out mate

As mentioned above maybe we can sort something out like a lip on the back of the hole so pipe work can be attached.

If you've got anymore suggestion for mods to this, or for completely different product then let me know.