FAO: MADRod - perfect bore
Thread Starter
Testing the future
Joined: Jul 2003
Posts: 17,597
Likes: 24
From: W. Sussex
FAO: MADRod - perfect bore
no, not you harping on about your top speed 
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
Banned
Joined: Dec 2002
Posts: 142
Likes: 1
Re: FAO: MADRod - perfect bore
Originally Posted by foreigneRS
no, not you harping on about your top speed
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
We know everything mate !!
Heres a test , go to the search engine & find a single quote from me about my Topspeed record, go on youve brought it up.
You mention my name & within seconds the Jealous wannabee Tosspots are on the case.
.
BANNED
Joined: May 2003
Posts: 23,032
Likes: 2
From: Mongsville, wiping Jimbo.'s spastic arse.
Originally Posted by MADRod
Heres a test , go to the search engine & find a single quote from me about my Topspeed record, go on youve brought it up.
You mention my name & within seconds the Jealous wannabee Tosspots are on the case. .
You mention my name & within seconds the Jealous wannabee Tosspots are on the case.
. ok
https://passionford.com/forum/viewto...light=#2730289
Cant a standard Cossie beat a 355 they are pathetically slow. .
167 down Brunters when ive heard Cossies can do 200+.
167 down Brunters when ive heard Cossies can do 200+.
https://passionford.com/forum/viewto...light=#2723904
anything 200mph +
anything else is just a sports car
Never had mine called a Supercar before, usually a 16year old Taxi is as good as it gets
anything else is just a sports car
Never had mine called a Supercar before, usually a 16year old Taxi is as good as it gets
https://passionford.com/forum/viewto...light=#2719243
Yes have a Data Logged 8300rpm in 5th thats 210.2mph in my Saff.
Have lengthen the gearing & would have to hit 217.4mph to hit it now & thats very unlikely, but we are going to try
Have lengthen the gearing & would have to hit 217.4mph to hit it now & thats very unlikely, but we are going to try
https://passionford.com/forum/viewto...light=#2700066
I did the maths before my Topspeed attempt to crack 200mph, using known Topspeed/Power runs at Brunters using other MAD cars data.
It spewed out :-
200mph 664bhp
210mph 769bhp
215mph 825bhp
It spewed out :-
200mph 664bhp
210mph 769bhp
215mph 825bhp
https://passionford.com/forum/viewto...light=#2699598
The quote below was made in 2001 & suggests 200mph is impossible.
When did you last see a 200mph Sierra Cosworth ?
Answer : Did you ever ?? No to my knowledge.
Why?
When did you last see a 200mph Sierra Cosworth ?
Answer : Did you ever ?? No to my knowledge.
Why?
thats just from page one
Jealous? yeah.. I really want to own a scabby white saph
Trending Topics
BANNED
Joined: May 2003
Posts: 23,032
Likes: 2
From: Mongsville, wiping Jimbo.'s spastic arse.
Originally Posted by 89XR2
DaveEscos Seriously, if I ever meet you i'm going to buy you a pint for all the times you've made me nearly wet myself laughing
PassionFord Post Troll
Joined: May 2003
Posts: 2,819
Likes: 8
From: Hull
If their work and equipment is as good as their web site, then they look very good.
There is one very specialist company close to winchester that do some very high tech machining and appear to be doing the same thing as this company.
Machining can make or break an engine, so use the best you can find.
There is one very specialist company close to winchester that do some very high tech machining and appear to be doing the same thing as this company.
Machining can make or break an engine, so use the best you can find.
PassionFord Post Whore!!
Joined: Jun 2003
Posts: 5,472
Likes: 223
From: Marlow Bucks
Re: FAO: MADRod - perfect bore
Originally Posted by foreigneRS
no, not you harping on about your top speed
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
http://www.perfectbore.com/
i was just reading about this company in the latest issue of Engine Technology International magazine and wondered if they were any use to you? with their experience in motorsport, maybe they have cylinder liners better than the mountune nikasil ones?
dunno if you and mark know them already, but thought i'd post a link for you anyway. only just down the road as well
,Lets just say more than before
Mark
Thread
Thread Starter
Forum
Replies
Last Post
nicodinho
Ford Non RS / XR / ST parts for sale.
6
Oct 7, 2015 12:56 PM
