Performance Ford - Out Today - My Grudge Match
Just read your feature, lot of work gone on to make it.
Did PE tell you that you had 420bhp ?
Done a RR day with them and only had 339bhp in my XR4i Cosworth and my car beats all your times
Mine was also tested at Brunters.
Steve.
Did PE tell you that you had 420bhp ?
Done a RR day with them and only had 339bhp in my XR4i Cosworth and my car beats all your times
Mine was also tested at Brunters.
Steve.
Trending Topics
Thread Starter
Part of the Furniture
Joined: Dec 2005
Posts: 199
Likes: 0
From: Doncaster
Mine relined PE's 2WD Dyno. It saw 380lb ft at 4500 RPM.
Chris at PE said its at least 400BHP!! So thats some reccomendation!
The times we excellent for FWD on a slightly damp cold day.
I backed of from my top speed run when the ACT's reached 44 degrees C and I wanted to DRIVE my car home.
Chris at PE said its at least 400BHP!! So thats some reccomendation!
The times we excellent for FWD on a slightly damp cold day.
I backed of from my top speed run when the ACT's reached 44 degrees C and I wanted to DRIVE my car home.
Thread Starter
Part of the Furniture
Joined: Dec 2005
Posts: 199
Likes: 0
From: Doncaster
Originally Posted by Dan
Sounds good mate! 
What power is Nims car making now?
What power is Nims car making now?Im going to have to get it on one of them that bolt to the hub
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by FFOC Big Ad
Originally Posted by Dan
Sounds good mate! What power is Nims car making now?
What power is Nims car making now?Im going to have to get it on one of them that bolt to the hub
Will take 1200bhp at the wheels This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Thread Starter
Part of the Furniture
Joined: Dec 2005
Posts: 199
Likes: 0
From: Doncaster
Originally Posted by Rob@SCC Performance
Wont max mine out Will take 1200bhp at the wheels
This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Will take 1200bhp at the wheels This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Whats SCC's postal address for my Sat Nav and I'll give you a call towards the end of the month if thats ok
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by simon170
Hi ya Rob, what kinds dyno is that matey? Inertia or Eddie current? 
Its a Dyno Dynamics 450 Single Axle Dyno - Eddie Current
More details can be found here http://www.dyno.com.au/usa/specs/specs_450_SA_imp.htm
20K+ Super Poster.
Joined: Jun 2003
Posts: 22,888
Likes: 0
From: Local, when i'm home...
Originally Posted by Rob@SCC Performance
Originally Posted by FFOC Big Ad
Originally Posted by Dan
Sounds good mate! What power is Nims car making now?
What power is Nims car making now?Im going to have to get it on one of them that bolt to the hub
Will take 1200bhp at the wheels This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Who's is that and what engine is it!? Wicked power!
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by FFOC Big Ad
Originally Posted by Rob@SCC Performance
Wont max mine out Will take 1200bhp at the wheels
This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Will take 1200bhp at the wheels This car made 340bhp at the wheels without any problems so come down and give it a try, if you max it out its on the house
Whats SCC's postal address for my Sat Nav and I'll give you a call towards the end of the month if thats ok
Post code is AL1 1PN
Give us a call when ya ready mate
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by JohnnyB
and secondly you were trying hide that you had one on the way not saying much, but enough
not saying much, but enough
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by JohnnyB
Thought it was 8 weeks to build and 2 weeks to ship
anyway back on topic.....
Good feature Chaps......
didnt beat my 1/4 in 13.54 though
withonly 325 bhp
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by FFOC Big Ad
Originally Posted by Rob@SCC Performance
didnt beat my 1/4 in 13.54 though withonly 325 bhp
withonly 325 bhp 
Originally Posted by FFOC Big Ad
Mine relined PE's 2WD Dyno. It saw 380lb ft at 4500 RPM.
Chris at PE said its at least 400BHP!! So thats some reccomendation!
The times we excellent for FWD on a slightly damp cold day.
I backed of from my top speed run when the ACT's reached 44 degrees C and I wanted to DRIVE my car home.
Chris at PE said its at least 400BHP!! So thats some reccomendation!
The times we excellent for FWD on a slightly damp cold day.
I backed of from my top speed run when the ACT's reached 44 degrees C and I wanted to DRIVE my car home.
I respect the fact you backed off from the top speed but your 60-100 time should be faster than mine due to you having more power (at least 60bhp + and torque 30lb/ft +) no traction issues as well and you are 1.01 seconds slower
As said above mine was tested on PEs RR and tested at Brunters.
Steve.
I've found that life I needed.. It's HERE!!
Joined: Aug 2004
Posts: 1,062
Likes: 1
From: Essex or Uxbridge normally...
Originally Posted by Rob@SCC Performance
Originally Posted by simon170
Hi ya Rob, what kinds dyno is that matey? Inertia or Eddie current?
Its a Dyno Dynamics 450 Single Axle Dyno - Eddie Current
More details can be found here http://www.dyno.com.au/usa/specs/specs_450_SA_imp.htm
I only asked cos of its size, the US ones are normally inertia ones that are out of the floor like yours but they are normally bigger, and most Eddie ones are smaller and in the floor........ so your was somewhere in the middle and I wasnt sure lolLooks the nuts mate
Originally Posted by simon170
Originally Posted by Rob@SCC Performance
Originally Posted by simon170
Hi ya Rob, what kinds dyno is that matey? Inertia or Eddie current?
Its a Dyno Dynamics 450 Single Axle Dyno - Eddie Current
More details can be found here http://www.dyno.com.au/usa/specs/specs_450_SA_imp.htm
I only asked cos of its size, the US ones are normally inertia ones that are out of the floor like yours but they are normally bigger, and most Eddie ones are smaller and in the floor........ so your was somewhere in the middle and I wasnt sure lolLooks the nuts mate
Would expect faster times with that power IMO. 0 to 60 aint 2 bad
I've found that life I needed.. It's HERE!!
Joined: May 2003
Posts: 1,285
Likes: 0
From: ST Albans Car Clinic
Originally Posted by Tim
Originally Posted by simon170
Originally Posted by Rob@SCC Performance
Originally Posted by simon170
Hi ya Rob, what kinds dyno is that matey? Inertia or Eddie current?
Its a Dyno Dynamics 450 Single Axle Dyno - Eddie Current
More details can be found here http://www.dyno.com.au/usa/specs/specs_450_SA_imp.htm
I only asked cos of its size, the US ones are normally inertia ones that are out of the floor like yours but they are normally bigger, and most Eddie ones are smaller and in the floor........ so your was somewhere in the middle and I wasnt sure lolLooks the nuts mate