I am breaking my track car and all parts are forsale
All parts are new and some are second hand

Engine spec
Long studded 200 block built by A1 Rallysort
New piston pocketed
New shells
ARP bolts in the bottom end
Valve guides
Group A gaskets right threw
Alloy pullies
new powder coated rocker cover
£2500

R&D 6 speed dog box fully rebuilt with brand new gear leaver £4000



Group A rear beam and mag arms £1100



Mocal oil cooler kit brand new with remote £200

Isky double valve springs new £150

Burton power 4wd oil pump uprated £150

Radtec radiator for fast road and track £250

Radtec RS500 style intercooler 75 mm outlets

Compression struts and ajustable TCAs cost £500 from Burton power will take £400

Foot rest for passenger £25

Flocked dash £120 no gauges

Roll cage front and back with door bars £400


AP 6 pot racing brakes for track use new plus padgit blue pads


Stack ST800 plus lap timing and all harnesses etc £750

Air injectors brand new £250

Engine mount GP A £100

Grey injectors new with fitting kit £250

GT28/40 turbo bought from A1 Rallysport rated at 480 bhp with very low lag and great driveability £700


New twin head lights painted white morretes with 4 bulbs

Brake rotters AP 355x32 new just done 2 laps round Oulton park to fit 4wd £350

I also have a brand new set of 330x28 AP rotors never been used £300
Brand new sparco steering wheel and sparco quick release very light all alloy £200

AP 4 pot calipers new cp5200 plus padgit blue pads £450

I have a brand new fuel tank with sender and colectors from pro alloy £600


Revotec gauges in RS vent holder £100

I have 3.9 front and rear diffs
Rear built buy Brom at the Zoo 7 1/2" rear £250


Front ATB 3.9 with 6mm plate for stifferning ( ATB is new) £400
Seats FIA approved in carbon kevler brand new with alloy runners £600 pair



Group A pedal box brand new with bias control £250



There is all sorts left steering rack hubs suspension etc look at my resto post and phone me with your offers please
07957495209

 

 

Hi, can you pm me a price for the dash plus the gauges

 

 

those air injectors look nice-have you still got them?
how much for the intercooler?what ecu was on it and do you still have it?
cant believe youre breaking this after all the time and effort.it looked stunning in the workshop when i came down
jay

 

Yes still got the air injectors
Intercooler £250
L8 ecu to run coil packs and closed loop plus chipped to run 850cc injectors

 

Cage sold to me, let me know when its ready to collect Paul!

 

Ok max

 

2nd shout on the Air Injectors if fordsportjay dont take them please Paul

 

how much do you want for

ecu
injectors
loom

?

 

Paul Robbie wants the Compression StrutsTCA's etc.

Price on the coilpacks please

 

How come its being broken....

Sucha top spec you were going for

Where do you find all these parts its like a trip dowm dream lane looking through that stuff

 

Mr snapes

I am very interested in the rear beam ,,Tried to call you but got answer phone

Please call me

Paul

 

Help please to much to do

 

Hi.

Is that a 2wd rear diff? If so do you still have it as I want it?

CheeRS!

 

Yes mate,this is a 2wd 7.5 inch diff with a 3.9:1 crownwheel and pinion fitted....

Would make your car a little more sprightly on acceleration..

 

Yes mate it is a 2wd diff

 

Dear Paul

What version is that rear beam.or from what year is it.
What ratio`s does the r&d gearbox have.

Kind Regards Oscar

 

How much for the AP 6 pot's???

thx

 

Don't do it Paul.

get it finished and drive it,then decide.

 

price on morettes please

 

Mocal Oil Cooler - SOLD

Paul you have a PM

(ps - sorry to see it has come to this, read your resto thread just last week )

 

Ration on the R&D box please ?

Henrik

 

Hi.

Tried calling the number but no answer. Put me down for the diff and I'l collect the weekend.

Do you have pm.

CheeRS!

G60

 

A very sad thread indeed

 

Just be patient with Paul mate, this is very upsetting for him & think his main concern is keeping his business a float so he dont have to break it.

 

well said sticky, WOULD be such a shame to break it

Sent you a PM ref our phone conversation yesterday Paul (seveneigths)

 

Sorry for not getting back to everyone i have had 67pms and about 20plus phone calls all for the parts plus phone calls for my buiness and my day was so busy..... what sticky has said is so true it is killing me reading all the pm's and post you have all put up i will get back to you all so please be patient many thanks

 

BTTT

 

woohoo price on morettes

 

hi bud do u still have engine

 

snapesy

I honeslty can't belive your braking this motor i was looking forward to see your car this year looks like you haven't cut any corners either real shame i'm gutted to be honest


Can i ask you why are your breaking it

remeber i was talking to you at donno last yr thats why i was looking forward to see it

your one completed would have been one of the best saffs that i know off , can't belive it you have gone all this way an your balling out total shame

marco

 

Hi Paul.

PM sent.

Regards

G60

 

how much for the strut brace mate?

 

Sorry Gaz i told Snapes a week or so back that i wanted the strutbrace...

 

Is all the heat sleeve still on the breather pipes still there, as i could do with it back to re-do mine.

 

Sorry Paul the sleeving was left on mate

Things that have gone

Air injectors sold
Wheels sold
Breather and power steering bottle sold
Rear Diff sold
Cage sold
Peddle box and ECU with coilpacks sold

Every thing else is still up for sale so please pm me what you want as my inbox is full so the people who have pm'd me first has now gone cos i am getting pm's every day

 

price on morettes and have u still got Radtec radiator

 

ok, i'll call Jay and get it back off him.

 

bought in good faith with the breather kit............