JD Motorsport
#1
Advanced PassionFord User
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: fife, scotland
Posts: 1,508
Likes: 0
Received 0 Likes
on
0 Posts
JD Motorsport
anyone have a contact site or number for them? been told that they do RS2000 engine conversions into other cars and was wanting a quote from them for fitting up stuff to my MK4 cab to see what it would entail........
cheeRS
Neil
cheeRS
Neil
#2
RS2000 4x4
Join Date: Aug 2006
Location: Burbage Embassy, Barwell, Leicestershire
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
you can email them on Crspares@aol.com mate or http://www.jdmotorsport.com/ had loads of RS2000 stuff off them in the past always been spot on
#4
I'm Finding My Feet Here Now
Join Date: May 2007
Location: Victoria, australia
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
i bought an airbox off them once and they sent me a zetec one, made a phone call back to them and they sent the right one out straight away.
fair bit more work getting an rs2k lump into a mk4 than a zetec (ive done both) tbh may aswell do the 2.3 hybrid and fit that into it mate thats what im doing just need the same mounting as the rs2k engine. some people do it by making up a new mout from the cvh one or some cut the mounting plate off the chassis and make up a new one, thats what i did. only problem is height from the chain bulge, mines had the whole engine and gearbox assy lowerd by 10-20mm but still have to have the bonnet on raisers to stop it rubbing.
fair bit more work getting an rs2k lump into a mk4 than a zetec (ive done both) tbh may aswell do the 2.3 hybrid and fit that into it mate thats what im doing just need the same mounting as the rs2k engine. some people do it by making up a new mout from the cvh one or some cut the mounting plate off the chassis and make up a new one, thats what i did. only problem is height from the chain bulge, mines had the whole engine and gearbox assy lowerd by 10-20mm but still have to have the bonnet on raisers to stop it rubbing.