FREE TO FIRST DIBS Fiesta Shell currently rolling
Update
Just been offered £100 rolling with s1 wheels I will accept this offer at the end of today For £100 he will get the full rolling shell with wheels and thats it, it has an engine in it at the mo but for £100 the 2.0 silvertop is not included nor are any other parts. JUST THE SHELL WHICH IS ROT FREE AND HAS BEEN TREATED 1ST MARCH THIS CAR IS FREE TO THE NEXT PERSON TO CONTACT ME FIRST TO PM ME GETS IT UPDATE The next offer takes this car and the following. FIESTA SHELL 2.0 SILVERTOP ENGINE FULLY REBUILT LOCKWOOD DIALS AND ENCLOSURE RS INLET MANIFOLD 2.0 GAS FLOWED THROTTLE BODY AND S1 7 SPOKE ALLOYS ANY OFFER CONSIDERED!!! TRY YOUR LUCK http://i47.tinypic.com/24v2v4k.jpg http://i48.tinypic.com/dh5opl.jpg http://i45.tinypic.com/b5fh8x.jpg |
were are you mate ?got a pic ?
|
In Coventry,
Yeah will upload pics in the morn. Standard really everyone knows what they look like lol |
pics also please,not far from cov,and my mates after one,does shell need much work?
|
I've done nearly everything mate. all rust has been sorted apart from the front and rear beams and the underside but no one does those unless hardcore rust beaters lol.
Only one issue the rear bit where the boot meets the shell needs jigging up slightly - I stored a 2.0 silvertop in the boot and when I lifted it out it bent it abit. also got lockwood dials and full interior minus the two front seats. 15 inch motorsport alloys and full spax suspension £120 for the wheels and 70 for the all round suspension can do a deal for everything including a 2.0 silvertop gearbox and loads of other bits. but 300 gets the shell maybe 500 for the lot which is like 1500 less than ive put into it. the shell alone owes me 650 |
pics mate?
|
hmmm i could be keen on the wheels! And the shocks!
|
mate I keep adding pics to the thread and someone keeps deleting them!!
|
Just realised that I had posted the thread twice lol.
I'll add the pics today |
I want them rims on the car if there for sale......
|
so how much jigging will have to be done ? is the bend bad ?
|
Originally Posted by d2472
(Post 4663438)
I want them rims on the car if there for sale......
|
Originally Posted by fuzzy232
(Post 4663447)
so how much jigging will have to be done ? is the bend bad ?
|
Originally Posted by DHMC
(Post 4663586)
Sold mate others still for sale tho
|
What you mean? I've had them on my fiesta and on various other fords
|
Right i need it going so someone make me an offer
|
Originally Posted by d2472
(Post 4663597)
shame there for a series 2 mate so no good
|
Originally Posted by fiestaturbo1984
(Post 4664844)
they are series one alloys numpty and look worth every penny, shame you are so far away as looks like something id like
|
Is it a genuine RS Turbo?
Looks like it could have been a converted XR2i Scott |
Originally Posted by sjoyce666
(Post 4665448)
Is it a genuine RS Turbo?
Looks like it could have been a converted XR2i Scott i was thinking this because if you look at the rear windows they dont look to be pop outs |
I'm not sure what the difference is. I bought it as a non runner with the plans to 2.0 zetec it.
I think its highly possible its a xr2i I'll amend the thread |
Originally Posted by DHMC
(Post 4665531)
I'm not sure what the difference is. I bought it as a non runner with the plans to 2.0 zetec it.
I think its highly possible its a xr2i I'll amend the thread id say it was mate but if you genuinly wasnt aware then no problem but i would correct it mate |
already have...
|
Good man although i must say it looks like a nice shell to start a project with
|
its an xr2i shell. its my old car. thats the picture i took aswell lol. i did all the mods to get it to that spec in the picture including the rs turbo lump. it used to be a very nice car but when i sold it on for a 106 rallye it got ruined by chavs and blew the engine. claimed silly power figures aswell. shame i sold it really. :(
|
Originally Posted by TOMMY G
(Post 4676568)
its an xr2i shell. its my old car. thats the picture i took aswell lol. i did all the mods to get it to that spec in the picture including the rs turbo lump. it used to be a very nice car but when i sold it on for a 106 rallye it got ruined by chavs and blew the engine. claimed silly power figures aswell. shame i sold it really. :(
|
its a shame knowing some clowns ruined a class car
|
so do you have up to date pics of how its looking now?
|
hi mate, just wanted to ask aswell do you have any pictures of the rolling shell and what she looks like now.
thanks scott |
also pics of how it stands now
|
can ya give a list of what comes with the car i.e, intereor, brakes, cage, and is it rolling or not
|
Hey guys gonna go take some pics of how she looks now and she comes with everything but cage and front seats and it is rolling
|
are the S1 wheels still for sale if so how much.
thanks Pete |
Hey mate yeah they're still for sale for £150 with tires
|
They are yes but have been sold now.
UPDATE - The next offer takes this car and the following. FIESTA SHELL 2.0 SILVERTOP ENGINE LOCKWOOD DIALS AND ENCLOSURE RS INLET MANIFOLD 2.0 GAS FLOWED THROTTLE BODY AND S1 7 SPOKE ALLOYS ANY OFFER CONSIDERED!!! TRY YOUR LUCK |
any updates mate cheers
|
What kind of update mate?
Selling everything as a job lot for the next decent offer I get. You'll get the FIESTA SHELL 2.0 SILVERTOP ENGINE LOCKWOOD DIALS AND ENCLOSURE RS INLET MANIFOLD 2.0 GAS FLOWED THROTTLE BODY AND S1 7 SPOKE ALLOYS and I'll throw in the IB5 ST150 FIESTA GEARBOX INTERNALS WORTH £200 |
I was thinking of buying this but its over 200 miles from me :sad:
Good luck with the sale matey. |
Yeah I have family in washington, fatfield to be exact.
It's about 3hrs away lol |
no body? i need it going! im losing my garage!
|
All times are GMT. The time now is 07:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands