OK so i got it on finally, went to put the actuator on and to keep the wastegate shut i run out of threads on the rod!
I looked on the standard one that was on the car, and it shuts with the arm at a 5 o'clock possition. whereas my T34 shuts at a 6 o'clock possition. (have they put the arm on wrong?!)
I measured the distance between the edge on the arm to the edge of where you bolt the actuator. On the standard T3 it was 170mm. The T34 was 165mm
The actuator is a -31 and its a 4x4 sierra cos (non-cat)
Any input will be a great help.
CheeRS
Graham.