Originally Posted by fiesta cossie
wot do recommend for my road/ trackday car?
neg 2 degrees camber ? i set it to -1 degree
I have yet to work this out. Probably it would be best to consult somebody who knows about setting geometry. But take as a rule that it schouldn't be lower then rear camber.
0-2mm toe out? i set it to 1mm toe out
caster? as yet not checked this.
On road cars I set 0 degrees, no toe in or out. I don't know how this is in mm, I only know toe-in out settings in degrees. For good turnig on racing cars there can be around 0deg30'