I asked this at my local forum www.mkcruise.co.uk someone suggested to try asking at this site.

I need to know whether it's possible to change the torque split from 30/70 to 70/30 (or as close as possible). Is the torque split in the transfer box, or is it something to do with the diffs?

This would be for a project, where the entire engine and transmission system would be rotated 180°, and the differentials would be flipped over so the wheels turn the other way round. This would create a 4wd, rear engined setup.

The problem with this is that the torque split will put most of the power through the front wheels, where there is no weight as the engine is in the rear. If i could swap the torque split around so most of the power goes to the rear wheels, i'll be sorted.

Any help would be greatly appreciated.