stripping my engine today...........

https://passionford.com/forum/viewto...11256&start=40

...............they are in the wrong order


its (from memory)

4 Back
2
1
3 Front

PLUS only two are Stamped on the cap top (1 & 4), the other two have barely visible stamp marks in the side of the caps

they all have etched 4 or 5 digit numbers in the side of the caps which correspond to the etched numbers in the side of the rods... but rods 1 and 4 are from one sequence rods 2 and 3 are from another sequence ???

What gives??

The engine was blueprinted (presumably balanced??) by Power Engineering.... have they got it wrong