Originally Posted by Coldo
Originally Posted by Less
Bumper etc should be straight fit
Of the top of head the vubs are 5 stud on these not 4 styd as normal sierras
Nasty
Big job to find wheels to fit? preferrably escos/mondy/rs7 spokes etc?
change the front struts to std sapph ones, rear axel to a capri one, 4 bolt wheels here we come!
Front subframe has 1 inch spacers between it and the body, you will need a new steering shaft when you remove them. Capri rear springs fit too, lowering the back. Just use -40/-60mm front springs.
Electrics and interior just swap over from any 4 door, cosworth interior bolts in.
Any ford engine fits with out problems.