Personally. So I dont know specifically to your car.

Start from COLD
Fill system to the mark on the bottle.
Squeeze all the coolant hoses to try and shift the air around.
fill to the level again.
Repeat a couple of times
Start the car with the cap off.
Leave it idling
Engine will take in a fair amount of the coolant down into the block.
Keep the level on or slightly above the mark on the bottle.
Run the engine (idling) until the fan cuts in and out a few times.
Make sure the bottle doesnt run dry. Or you'll ahve to start again
Leave it to cool.
Check the strength of the coolant
Bung the cap on and take it for a quick drive.

Any Good