Originally Posted by
doga-ot
Right its easy my saph was non abs, I bought and fitted saph 4x4 cossie abs pump and servo etc then bought a braided loom to run it so I have abs but without all the abs nonsense like sensors, piping, ecu and module. the braided loom has a battery + battery - 2 small wires for abs light in clocks and a ignition live!
Hi, hope you are still around and can help me, I'm want to use the ATE pump like you with no ABS block and wiring, this bit it easy I have the wiring done, the plumbing for the brake line is troubling me though, does the rear run from the middle larger outlet and the fronts from either side, or do you block the middle and split it front and rear with the outer smaller holes? I've seen people say both is the way to do it