Originally Posted by
Tony old school
Hi All newbie here.
Questions
just bought a resto project mk 3 escort xr3 with 1.9 tall block janspeed turbo.
Originally Posted by
Tony old school
engine rebuild companies recommended ?
Barum Engines? Lee does a lot of Fords (mostly YB, but has owned an Escort Turbo for many years) and it's not that far away from you. Has a youtube channel with new videos every monday, wednesday and friday. Machinery ist quite old but it seems like the engines he builds are of good quality and look very tidy with an eye for detail.
Originally Posted by
Tony old school
junk the turbo go for twin 40 webbrs ?
Turbo ftw.
Originally Posted by
Tony old school
answers on a postcard please
Postcard? How oldschool.
Originally Posted by
Tony old school
Will post some pics soon
need to check bock to see if its a american or an bored out 1.6
lots of work to do bodywork ,interior,etc etc full blown resto
back in my youth running a xr3 lump on twin 40,s the induction roar cant beat that sound but yes in this case originality is the way to go
Usually a bored out 1.6 with a 1.8 Sierra crankshaft and cheap Audi 5E pistons. 1.9 conversions often suffer from thin cylinder walls and overheating problems because they've been bored out too much to reach the capacity. You could use liners and custom made forged pistons and keep it at 1850 ccm or less OR you could go the modern route, use a 1.8 or 2.0 Zetec engine block and convert it to ZVH. No longer an "original" 1.9 Janspeed but a sturdy block with a capacity close to the 1.9 the CVH had and the (mostly) original look.
Decisions, decisions.