And so that brings us up to my last visit to the car this week where i finally started to work on the car again. Its has a wash and the engine bay a good polish and we have began work.

This weekend was really just to try and work out an order of what needs to be cleaned and painted ready to go back on and what i need to order for the next time.
I managed to get the wiper motor and arms cleaned/painted and installed along with the fan/air con unit.

Cut the hole trough the bulk head and install the master cylinder for the hydraulic clutch conversion and dry fitted the brake lines to see if they can be cleaned up or need replacing. Im trying to work out what to use on the bulk head as the original sound proofing fell apart as they do. So if anyone has any recommendations let me know.








So this is the story up to date so far, im hoping to get back on with a bit more of the car before the end of the month. But i do need so advice help.

1) Any recommendations for bulkhead material?
2) The car is going to be running eventually around 450bhp are 8mm id fuel lines big enough?
3) Does anyone have a copy of the instructions to install a MSD New engine loom?
4) Does anyone have a picture of where to drill/mount the master cylinders to on the clutch peddle?

Thanks for now and hope you enjoy the update.