Originally Posted by
BIG LEE
Are you sure there 130 silvertop cams ? and are there the correct want around as in inlet and exhaust not mixed up ? if everything is all correct there isnt any real reasion it wouldnt start if all was ok before fitting these... was it timed up correct ?
100% the correct cams mate they have the 2 identifcation rings on the inlet cam and were removed from an xr3i 130 everything off the conversion is off the same car. The cams are the rightway around as it has an Id tag that passes the cam sensor. Timing seemed fine we used pins and bar and even tried the old screwdriver trick for top dead center and still nothing mate It ran beautifully before it's a 40k engine.