I’ve done a few things so far during winter hibernation. I had a small oil leak which was coming from the front of the sump around the half moon area, so a new one was fitted.




I fitted a hose to the over flow outlet.



After the sump was removed the distortion of the seal where it was leaking confirmed I may just be correct this time.



New gasket glued in position with some sealant around the outside of the half moons. I followed a recommendation that was on Fiestaturbo.com
It has been up to temperature and appears to be ok🤞



Also moved my Ctek charger point from under the bonnet to Velcro’s to the front crossmember. Opening the bonnet became too much hassle 🤣