Originally Posted by ray barker

update. the auto electrician let me down said he had to cancal i said book me in a gaine on his next slot but not heard anything. trying to get anything done like this in west cornwall is nearly impossable. i got the old engine loom out today took me a couple of hours. i did an hour yesterday and the same today. if your going to do this job on your own as i did i recomend pulling the loom out through the engine bay infact down underneath it was really easy. if theres two of you bring it through the car. i also stripped all the insulation of the old loom just on a visual the loom looks fine nothing burnt chaffed or forteuged ill ohms test it while im waiting for the new one. my saff had alot of optional extras from the factory as the id plate on the slam panal is marked with full leather and blue dash for a 1988 saff all came with grey cloth as im lead to believe also a clifford alarm with what looks like factory grommets in the bulkhead its to tidy a job to have been fitted after. just one multi pin plug powering up the loom