Hi mate ,
Only fault shown was p0190
When running it will run and idle perfect (apart from limp mode that's permanently on) and will start up again no problem , but now it won't start atall (after a few months of difficult starts e.c.t tapping throttle)
So looked into it , ended up changing FPS and checking whole loom back to ecu for faults , nothing. No relay or fuse problems.
So next port of call is to change the injectors as apparently excessive leak off can play with the readings an if ecu picks up on it it will disable fuel pump to start? Not sure if true but only thing I can find
Plus because if pump was knackered it wudnt run right when started would it ? Any advise is appreciated
Thankyou👍