Purchased a 6 degree beam for my 3 door a few months back and recently got round to fitting it but ran into a problems. When mounting the beam up using solid bushes it hits the floor pans next to the handbrake cable brackets. To get the beam up to the height it needs to be to bolt the diff mount up means it pushes the floor pans up quite a lot. It’s where the adjusting box sections come out of the front of the beam. The beam is mk motorsport and solid bushes all supplied through anembo. Has anyone else experienced this? Currently in talks with anembo and they think it could be the solid bushes causing the problem regards to height of the beam at the bush mounting area. Any help appreciated