Thanks for the reply focusV8

The clutch neutral position sensor, has been changed for a brand new one from Ford. There is a another switch at the top of the pedal called the clutch starter inhibitor switch, that's been checked with a volt meter, and it still doesn't start. The codes l have are as follows

P086B:1E-2C Neutral position sensor circuit range/performance
P08AE:00-2C Neutral position sensor B circuit range/performance
P086D:00-2C Neutral position sensor circuit high
P08B0:00-2C Neutral position sensor B circuit high
P086B:38-2C Neutral position sensor circuit range/performance
P08AE:38-2C Neutral position sensor circuit B circuit range/performance
P086A:00-2C Neutral position sensor circuit open

On a site note my Dad mentioned when he unlocked the car before the incident he could hear something making noises like it was wakening up. After the work when he opens the door he doesn't hear anything at all. The message he see's is "Ford key free switch ignition off press power" but that goes away once the driver door is closed. I don't know if this is related or a separate issue?

Thanks

Andrew