Old Oct 8, 2020 | 08:23 PM
  #2  
martysmartie's Avatar
martysmartie
PassionFord Post Whore!!
iTrader: (1)
 
Joined: Dec 2007
Posts: 8,460
Likes: 103
Default

Originally Posted by Ironmike79
Hi I need some help from you wiring guys if possible please
j 92 4x4 sapphire msd 270 chip otherwise standard
I was driving along about a month or so ago and the car started to lose power then regained and eventually completely went,car stopped no ignition lights or fuel pump priming but the car still cranks over but obviously doesn’t fire
i thought ignition relay but replaced it and still the same
the only things that work on the car is interior lights,side lights,and stereo
I have recently found if i bridge the ignition relay i can start the car? And runs as normal but obviously i cant turn off with the key
i have checked all i can but im not very good with electrics and now i need someones help as Im completely out of ideas.
If anyone can make suggestions for me to try etc it be much appreciated,I can any questions to what i have tried
i have tried another original ford immobiliser relay box from up under drivers dash but still the same
Also checked 3 multiplugs on bulkhead and loom plug behind battery all seem ok
power from ignition switch but but seems to get lost somewhere
Aftermarket immobiliser issue potentially, the fact you mention bridging the relay means power is not reaching it and this would be the most likely cause.

Have you checked it is disarmed?

Check ignition switch continuity and move forward from there.

Martin
Reply