Hi guys/ladies where to start well I've had my fiesta mk3 now since December and just recently bought a rear conversion kit for brakes.
The convertion brakes are from a mk6 fiesta st150 and I thought and got told that they would just bolt straight on after taking the drum off completely.
Well I took the drum off and put 2 bolts in to the axle and hub and the bottom 2 bolts don't line up. Complete nightmare if you ask me lol so my poor fiesta is sitting there on a hub that's held on with 2 bolts until I can do something please if anyone has any ideas please comment or message me thanks

With brake drum

With brake disc and new hub and left sat held on by 2 bolts

Close up
So managed to get it sorted drilled roughly about 16 to 18 mm in the top holes and 14mm in the bottom holes

Before