Originally Posted by
coco16i
Got a mate that has a 06 plate L200 and its got a corroded and leaking sump, anyone ever changed one of these as was wondering the best way of going about doing it.
Looks kinda close to the front axle when it comes to lowering the sump down, do you have to lift the engine up off its mountings or is there room to drop the sump with everything still in place ???
Cheers.
just done an L200
1. Remove radiator
2. Remove all bolts holding sump (10mm)
3. Remove 4 bolts holding oil pick up (12mm)
4. move sump around to access the 12mm bolts
5. When pick up is removed sump will fall out with a little wiggle repeat process in reverse to install.
6. No need to remove anything else