Originally Posted by
scoooby slayer
Could the turbo physically flow enough air for 955 hp at just 1.8 bar, I know the boost pressure is only the resistance of flow but even so seems a very low pressure to be running the turbo at flat out flow
Being polite it’s rated to 940hp I would be surprised if it could do.
At 955hp on pump it’s all about airflow from turbo =shaft speed so turbo imo would deep in to over speed and the exhaust wheel will fall off as turbo running well beyond it safe limits.
Anyone that runs a 9180 past 800hp has to run a speed sensor imo or they are just playing with fire.
Mark