Thread: Power steering pump high pressure connection
View Single Post
Old Jan 3, 2020 | 07:41 PM
  #14  
timsrs's Avatar
timsrs
Too many posts.. I need a life!!
 
Joined: Jun 2011
Posts: 923
Likes: 10
From: Derbyshire
Default
Originally Posted by tosh
Banjo bolt shaft has a total length of 26mm thats the cylindrical part including the thread but not including the thickness of the bolt head, (if that makes sense)

the smooth part of the banjo shaft with the holes in it is 18mm so the rest of the 25.5mm is thread

both washers are 2mm thick

power steering rack to pump feed (the metal part that the banjo bolt goes through is 16m thick)

so that’s literally only 5 to 6mm of thread that screws into the pump, all the parts I’ve measured are all original ford from the 2wd sapph

Brilliant thankyou
Reply
0