i think thatīs not the problem there is absolute 0 metal in the oil. I am guessing it is just the aluminium just adjusted on the steel crank gear.

But the problem of no oil pressure after standing still is still there. Just cranked it again after letting it sit for a month. And again no oil pressure after 2 second cranking. which normally it did after sitting 3 months!!! oil pressure with priming is good!
So i canīt beleive that it is the oil pump (which is new). I also cant believe it is the oil filter that is changed numerous of times.

I had this problem before and also suddenly before the rebuild and with an other engine. I changed gasket between oil pump and block and both times that was the problem.
i am seriously getting a headache of this ####### car and ####### engine.
Why do these gaskets fail every 2 years?

does annyone know where to get some good qaulity ones that donīt fail