Advice please - While 'splicing' in an additional 12v socket to the cigarette lighter feed (which is always live) I inadvertently bridged the two cables. Now the whole circuit is dead - that's both the front and rear 12v sockets. Checked the 15A fuse (#47 on a 2002 ST170) and it's fine but replaced it anyway just in case. Circuit is still dead and I've been unable to find any hidden in-line fuse. I ran a meter across the fuse pins in the fuse box and no 12v power there either (ignition on or off).Is there some other different (fused) live feed the cigarette lighter circuit is fed by - higher than 15 amps? I'm stuck