Originally Posted by
Caddyshack
Lots of people say they crack blocks but I think it MUST be a fitting issue as ARP would change their design...interested in your thoughts and findings.
Toby if Tony will not use them and there are so many threads regarding these studs
Mine was fitted as per instructions and being an engineer by trade I tapped all threads and cleaned out etc. Yet they still cracked my block.
Trouble is the head expands at different rate to the block and causes them to come loose and if you torque up higher they can and will crack the block.
Hence why the cosworth and ford designers opted for the stretch bolts.
Or the other option is long studs but only on a 200 block.