Thread: Peugeot 205 with 4wd cosworth engine and running gear.
View Single Post
Old Mar 30, 2018 | 12:05 PM
  #2007  
Caddyshack's Avatar
Caddyshack
10K+ Poster!!
 
Joined: Mar 2013
Posts: 10,837
Likes: 1,033
From: Guildford
Default


I forgot I had these, I found them when clearing out the loft on my workshop today so will see if they will go on the front or rear of the car. I am having a latching handbrake so will not need a cable.



It has always annoyed me that when working near the sump I would always scratch my arm where someone had just cut off the unused speedo cable and left strands, the plastic gear just spun in the housing so today I made a plug / bung on the lathe.



Oil seal with grove for the pin



Tapped it for m10 and threadlocked in a titanium bolt.
Reply
0