Originally Posted by GVK.

Thread here where someones reamed the bushes out to stop the actuator being seized, it's the shaft that the missing motor in the pic acts upon where the problem is, be aware if you take it apart there's a gear that falls out and if you don't get it back in the right place it won't work again!

https://www.fordownersclub.com/forum...or-diy-repair/

Only repair I have done is to replace the actuator assembly , but the part alone is £600 IIRC

If the actuator is replaced the transmission needs 'learning' on IDS which is the Ford main dealer tool.

The oil level filler hole can be accessed via the large hole in the centre of the bracket, the motor has been removed in this pic.



If your unit can be repaired - http://www.ecutesting.com/catalogue/...gsar7k004.html

Found an old thread where I had a similar problem https://passionford.com/forum/fiesta...asm-issue.html