You will see in the first few pictures how the hangers are distorted and are definitely not staying on any longer.
The O/S lower axle bar has sustained some damage I've no idea how see how the bar is bent out of shape.
However because of the Damage the hanger,and bracket on the axle were bent out of alignment by 10mm there was also a few cracks in the hanger
The N/S was in better condition but because the bolts used axle and hanger ends were threaded all the way.
They actually destroyed the rose joints and crush tubes in the bushes wore them out and the pick up holes were 2 mm bigger then needed.
The new hangers I've made have now got the ability to be adjusted both ends now and not just the axle end.
Just one question why would there be a nylon bushes in both lower axle bars and two black poly bushes in the top axle bars ?
im asking this because if there is a good reason for this I will replace the same.
Or I will replace with all poly bushes any ideas please.