Old Nov 16, 2017 | 08:44 PM
  #6  
slammedorion's Avatar
slammedorion
PassionFord Post Whore!!
 
Joined: Nov 2004
Posts: 4,773
Likes: 237
From: Cheshire
Default

So the current spec after 10 years

Bodywork. . .

Resprayed in Ford Moonstone blue
Delocked all round
S2 RST bonnet and 90's spec front bumper
Saff boot spoiler
clear lights all round

Interior. . .

Custom 90’s spec full retrim, lower door cards done in grey leather
Flocked dashboard thanks to Raj @ Autoflock
A few racetech gauges, boost, oil pressure/ temperature
Wideband gauge
Retrimmed Saff wheel, gearknob and gear gaitor

Wheels, suspension, brakes. . .

17 inch Borbet C's refurbed and painted in Bentley Tungsten Grey
Fitted with 205/40/17 Goodyear eagle F1's all round
Cossie front and rear brake set up
Polybushed all round
Adjustable TCA's
S2 Front and rear anti roll bars
Gaz coilovers
Rear strut brace

Engine. . .

2 Litre silvertop zetec turbo
uprated pistons, rods, valve springs etc
CDF cam pulleys
GRS fmic
Alloy rad with twin fans
Big Green cone air filter
Focus RS inlet manifold, injectors etc
Crazycage custom exhaust manifold with Miltek downpipe and standard rebuilt FRS turbo charger
-31 actuator
Custom exhaust
044 motorsport fuel pump
Adaptronics ECU
http://www.adaptronic.com.au/about-us/

Gearbox. . .

CTS stage 2 box
paddle clutch
hydraulic clutch conversion
quickshift

Lots of new nuts, bolts from Ford plus a cleaned underside


To do for next years shows

Sort coolant issue, water temp/ fan issues
Tweak map again and maybe we can finally give it some more boost
Fit:-...
Focus RS box
Brembos
Headlights
Recaro headrests to the back seat

I’ve bought some smoked side repeaters, may fit them for a change and fit some smoked/ red rears ( I’ve got a spare pair of clear rears here ready to mod )
I’d like to upgrade the rear poly bushes to Powerflex and powdercoat all rear end parts

Last edited by slammedorion; Nov 16, 2017 at 10:06 PM.
Reply