Update time

Started to paint the inside of the building . I decided to use sandtex smooth mansonary paint as it's thick and can be wiped down as it drys with a rubber like coating.
I purchased 20 litres thinking that would be enough but when it dried out I knew it would be a bit patchy and would need another coat, well 70 litres later and 3 weeks off and on I finally finished lol.







Next was painting the beams , I decided to use hammerite direct to rust and it went on very well , the next day checked it over and there was rust spot everywhere wtf , so decided to touch up the rust spots and ran out of paint , got a 1litre tin painted and the next morning it was a cream colour which really fooked me off , so got a new 5 litre tin and repainted every beam again.







Armoured cable from the log cabin was pulled back and feed into the building





Getting there



Then last Friday the roller garage door was fitted



Couldn't fault Attenborough doors the lads were quality and the doors the dogs bollocks. It's a secureoglide door and iam very pleased with it for £1890 fitted.



Full box included in the above price



Door controller with built in light , Schneider disboard it's a bit on the large size but if I start to add lathes etc I will have plenty of spare breakers. Powered up and the first bit of conduit for the supply for the door.



Also painted the rsj underside black to match the fascias



Manual override plate with lockable cover



I've painted the floor with the first coat thinned down , now waiting for more paint for the top coat and also got to wait for 24 hrs before it's fully dry. Once the top coat goes on I won't be able to use for 7 days as he said that's the best way to let it cure properly.

I will do more update as and when

Next jobs are insulate the eaves
Board the ceiling and paint
The lighting , electrics etc
Buy and fit cupboards
Fetch my stuff from storage and move in

Cheers paul