Looks like I am gonna give the Dimma Clio a miss, it would need a full respray and I don't want to get in to that with it as have too much else on the go.

I have fitted the MK bladed rear anti roll bar now but not tested yet as have stripped it all back out to paint the underside where I have welded the mounts in...its all quite tight but fits now that Mark removed 24mm from the width (arrived with him Saturday, cut an rewelded same day and posted back same day...Thanks Mark)

I had to turn up a few bushes in the lathe to make "large washers" that would not bind on the spherical joints and trimmed a tiny amount off the blades (turned the ends down to replicate what was there)

Will post some pics up when the paint has dried and put it all back together.

Rangie is still back with the dealer but they have finally acknowledged that there is a noise on the anti roll bar, I just need them to now replace the valve block on the Active Ride Control as I know it is that causing the problem, it needs the twin damper block from the 2015/16 revision.