Originally Posted by
fatboy billy
Cheers guys I'll get the wheels machined down then
Hi
Please dont do that - you risk having too little material under the wheel nuts. If you remove 10mm its quite a lot to remove from that area.
As a note
I have a 4x4 sapph and I run 8x17 et35 on front and et25 on the rear and it looks good I think.
If I put the et25 on the front it looks strange and they will catch
Tyres are 215/40 - so they are stretched a bit which help too
Car is lowered a little and rear arches are rolled no rubbing
Cheers