I have changed the locks and got new keys. I hope I can get rid of some, because having one for ignition and fuel cap, one for the rear and one for the sides is maybe toooo much :S hehe



I took also a service to the engine. Everything was oem! Spark plugs, leads etc was from factory hehe! So changed the cooling water to red and filled a bottle Redline water wetter. Changed the spark plugs and leads, NGK plugs and universal leads that I cut to length. Oil filter changed to Royal Purple with good filtration and filled up new oil, Royal Purple HPS 20w-50 with high Zink in it. New 82 celcius thermostat and new waterpump. New oem fuel filter








Then I wanted a instrument with tachometer Cut a piece from another Sierra at the wreckers. Then made it all nice with some braided and heat shrink Soldered the loom in the car and Voila







I also began to get some parts for my plans in the winter I got an brake pump from a Cosworth 3DR


Complete front hubs from Cosworth 3dr


I got a free spare ohc engine I will rebuild this later with throttle bodies etc. The cylinder is already under some magic work


Cossie 4x4 rear suspension, I will use 3DR trailing arms and arb.


My new gearbox and diff oil


"Few" parts was ordered :P



Bought som used 4 pot calipers and rear Koni's. Front arb clamps. I will have the calipers refurbished with pistons etc


Refurbish kit from BigRed, H&R springs and rear hatch dampers


New diff mount and bushes


3dr trailing arms!


7" diff with LSD and 3.92:1


CL brakes RC5+ pads, rear spring bushes and arb link bushes


Diff tool, camber and toe in shims,an6 hose clamps, diff seals


Top end gasket kit


Diamond discs


Bushings, HD geabox mount, brake bias valve.


Frobt strut top bushes, wheel studs and nuts and wiring for the fans


Quickshift, stainless braided brake lines, 2.7 locktolock steering


Koni frobt struts


Vdoes, oil temp, pressure and water temp


Rear calipers and yokohamas advan neova AD08R in 205/50-15"



Some random photos from a cruise