Originally Posted by FastLife91

Hello

As several of you may know I have been stuck on this bolt for about 1 week now and have spent around 50 hours in that time trying to get this bolt tight.

I wish to thank everybody who has helped and gave advice in my problematic situation of not being able to get the turbo bolt (top bolt at rear of engine)on tight enough because of no space either side to get a spanner or any other sorts of tools on this turbo oil feed bolt

An old friend of mine came to have a look (he's about 63- 65, I am 25) and he too agreed it was very difficult to get to, just before he left he had an idea. the bolt is hexagon shaped, he says he will take the bolt home with him tonight and cut thin groove into it, that way we can put a screwdriver in the grooves and turn it or hit the screwdriver that is in the groove with a hammer.

I think it is a real good idea and am hoping it will work, please tell me you think it will ?

thanks