Originally Posted by
Greasenipple26
Hi anybody had anything do with 1.7 vct conversion on fiesta . Iv fitted my engine now and connected the engine bay loom the enginbay loom from the puma has two connectors but the fuse board has three sockets is there any wiring info that will allow me to overcome the problems caused by this can any1 help.. cheers people.
I have not done this conversion myself however have spent a lot of time reading up on it!
My understanding of the wiring loom on the puma/fiesta is there is two types; analogue and digital.
As far as I know the digital one has 2 plugs and the analogue 3. you need to make sure you get the loom from the same type as your fiesta, the best way to tell is look at the clocks, if it has a digital display then obviously you need the loom from the same type of puma (later one).
Hope ive made sense!