I got my stack shift light working today so that is another job off the list.

I have offered up the bladed anti roll bar for the front and with a bit of fabrication I can get the MK mounts to work on the 205 chassis. Then once Mark Walker (mk) delivers the rear 6 degree beam I can see if I can get a rear bar in there too, I can then really soften the springs and fit the new Leda dampers that I am going to order then get it all set up by a chassis guru.

MK thinks he may drive the beam down over the next week in his van which will be good news.

I will get some pics up of the anti roll bar soon, I plan to fit it with riv nuts (steel) and the weld it in place.