Originally Posted by Holty
1. Car will cut out for what appears no reason, just dies on me...usually when slowing or stopping at a junction. Some times it has just died whilst driving along at low speed.
Have you had anything changed lately that would of changed the positions of the trigger components and sensors? They need to be set with a 6 thou gap. The positions of the pickups should be set to the postion that the car was mapped with (16degree BTDC TOP) (@TDC Bottom)
Originally Posted by Holty
2. Car drives fine then go to accelerate and it missfires...running but no power, done this today, put clutch down and up...when done this car drove fine again...then started to cut out five mins later.
It sound like the fault/error is to do with the sensors, have you checked the sensors for resitance? The top sensor should read 600-900 ohms.
