Custom lightened flywheel done by Gary Black (Blacks of Stichill). This was an experimental piece that Gary did for me to see how light we could get a standard flywheel. Standard weight is usually 7.5-8kg, this one is just under 6kg. As above, I was going to fit it to my rally car but decided to leave the engine alone so no longer required. As this was an experiment, Gary didn't charge me for the work, so only asking £30 for it. Would be wrong of me to charge for something that I didn't pay for! This would need balancing to suit your engine, but that shouldn't cost too much.

WP_20160929_21_54_53_Pro by Jon Scoltock, on Flickr

WP_20160929_21_55_16_Pro by Jon Scoltock, on Flickr

MW-Flywheel-028 by Jon Scoltock, on Flickr

Mountune F2/Maxi/Kit Car crank pulley - £50

WP_20160929_21_59_22_Pro by Jon Scoltock, on Flickr

Mountune F2/Maxi/Kit Car external crank trigger bracket. Mountune discovered that, when revving these engines to high levels, the internal crank trigger wheel would fail, so they fitted an external system. This is the sensor bracket. Matman could probably make you a trigger wheel. £20

WP_20160929_22_42_22_Pro by Jon Scoltock, on Flickr

Still more to follow.