Originally Posted by
2Litre
Hi Loomer, It's got the standard pulley on and it's in great condition.
Tim
Originally Posted by
2Litre
Stevie,
Just tested Map sensor, all seems good. Between pins 11 and 15 @ atmospheric pressure voltage is 1.56 I used a pump and increase pressure to 30psi the voltage is 4.96 and then slowly introduced a bleed, the voltage dropped steadily with no abnormal jumps through the whole range back to 1.56volts.
Cheers.
Tim
You need to monitor that on the road really in case it's rf picking up on the sensor