Hi Frank. I am no expert on this but as no one else has answered you yet (probably the middle of the night over there as I am in NZ) just looking at the ECU diagram above and reading your symptoms, it would appear either the ECU relay is faulty as it has feed in but nothing out or Depending where you are measuring this feed in it could also be the fuse on the relay. Basically with the key on you should have 12v on 2 terminals of the relay (one via the fuse) and if it is working should also be on the 3rd terminal (output) as well. I am assuming you also don't have 12v feed on pin 20 of the ECU itself. David